Yinlong Battery Case Kit DIY

Case Kit does not include bars, but can be added here.

Haltec balancers now screw onto top of case lid.  QNBBM screw to back side of case.  There is no balancer mounting solution for 1x6 or 2x3 cases.

Assembly required. 1/4" acrylic DIY kits for Yinlong cell batteries.  Includes glue and instructions.  Comes as kit- you assemble.  Holes in base for mounting to floor.

*Colored acrylic is not recommended to be combined with LED base.  The color will filter much of the LED affect.  You're paying good money for this and we want you to be happy with the results 

*Please tape your case up and check size before gluing. Returns will not be accepted once case is glued 

 Video instructions can be found here  

Dimensions: These vary slightly depending on which brand of terminal you are using

30/45ah- 16.3L x 8.5H x 3.2W

70/80ah- 16.3L x 8.5H x 5.8W

105/120ah- 16.3L x 8.5H x 8.4W

140/160ah- 16.3L x 8.5H x 11W

*Returns/Exchanges not accepted unless there is an error on our part.

*Returns no longer accepted on Ill Customz STANDARD cases as bars are discontinued